A0011197 Alternating current A terminal to which alternating voltage is applied or through which alternating current flows.A0011187 Safe area (non-hazardous area) Indicates a non-hazardous area.
A0011188 Function and system design Measuring principle Following Faraday s law of magnetic induction, a voltage is induced in a conductor moving through a magnetic field. Transmitter Promag 100 Device versions and materials: Compact, aluminum coated: Coated aluminum AlSi10Mg Configuration: Via operating tools (e.g. EndressHauser can be contacted to provide support in performing this task. Endress Hauser Promag 50 Code For PossibleConnection methods available Order code for Possible options for order code Power Housing. Ground cable Copper wire, at least 6 mm (0.0093 in The ground cable and ground disks can be ordered from EndressHauser ( 54). Connect the two flanges of the pipe to one another via a ground cable. The necessary ground cable can be ordered from EndressHauser. Transmitter Terminals Spring terminals for wire cross-sections0.5 to 2.5 mm. Cable type Characteristic impedance 135 to 165 at a measuring frequency of 3 to 20 MHz Cable capacitance. External forces are absorbed by the construction of the device. Mounting location Preferably install the sensor in an ascending pipe, and ensure a sufficient distance to the next pipe elbow: h. An optimum orientation position helps avoid gas and air accumulations and deposits in the measuring tube. The resultant increase in the rate of flow improves measuring accuracy with very slow-moving fluids. Avoid direct sunlight, particularly in warm climatic regions. Temperature tables The following interdependencies between the permitted ambient and fluid temperatures apply when. Cable entrycable gland Material Cable gland M20 1.5 Nickel-plated brass Adapter for cable entry with internal thread G. EndressHauser confirms successful testing of the device by affixing to it the CE mark. The measuring system meets the EMC requirements of the Australian Communications and Media C-Tick symbol Authority (ACMA). With the PEDG1x (x category) marking on the sensor nameplate, EndressHauser confirms compliance with the Essential Safety Requirements specified in Annex I of the Pressure Equipment Directive 9723EC. For details, see Technical Information TI00405C HART Loop Converter.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |